1. Successfully loaded FA onto you MINI and know how to navigate through the software.
2. Send us the two stock files from the loading of FA53 (“Stock Rom” and “Stock Tune”).
3. Complete the Tuning Checklist and send that over to us.
4. Spend one full week and get familiar with the logging process as well as what the various values mean.
5. Customers will be asked to submit one full set of logs*; once submitted, we will send back a customized tuned for your MINI (since you are not able to provide us with any AFR readings, thus this is considered a “customized canned” tune b/c we are basing your tune using logged ECU parameters ONLY).
-When you complete 550cc injector installation and prior to cranking the car, flash the Base 550cc tune provided. Then reset all adaptations and remove the key off the car for 5 minutes.
-Afterwards turn ignition to second position and connect Miniport to your car’s OBD2 port. As soon as the leds start to flash, crank the engine and let it idle and record a log of 3 minutes.
2. With 2nd gear in the gearbox softly accelerate from 2000rpm till 5000rpm. This must be done on a flat road with no traffic ahead. Acceleration must be really soft linear and slowly accelerating staying off boost and without being hard and steep with the gas pedal.
3. With 3rd gear in the gearbox perform the exact same procedure from 2200rpm till 5000rpm.
4. With 6th gear in the gearbox log a short cruising part (off boost) between 2400-3400 rpm.
5. With 3rd gear in the gearbox perform a WOT log (wide open throttle) from 2500rpm till 6900rpm.
6. With the engine hot, log 2 minutes of idle.
For example, tune1 cold idle logs: if file on miniport is log0001.csv rename it to log0001_cold-idle_tune1.csv.
Second example: tune1 wot log in third gear: if file on miniport is log0002.csv rename it to log0002_3rd-wot_tune1.csv.REALLY IMPORTANT: Do not open or edit logs to rename – just rename the file as is without opening them.
Reviews
There are no reviews yet.